RhinoCAM-TURN 2021

RhinoCAM-TURN is a powerful 2 axis Turning Center programming system that is one of the five modules offered in the RhinoCAM CAM software suite. This module includes Turn Roughing, Finishing, Groove Roughing, Finishing, Threading, Parting, hole machining & free post processors. RhinoCAM-TURN CAM software for your lathes and turning centers delivers outstanding value for your investment.
1.512,50 € Precio especial 1.436,88 €
Envio gratis
Entrega en 24h, comprando antes de las 15h ( en días laborables)
SKU
MEC-RC-T21
SKU
RC-T21

RhinoCAM-TURN is a powerful 2 axis Turning Center programming system that is one of the five modules offered in the RhinoCAM CAM software suite. This module includes Turn Roughing, Finishing, Groove Roughing, Finishing, Threading, Parting, hole machining & free post processors. RhinoCAM-TURN CAM software for your lathes and turning centers delivers outstanding value for your investment.

The table below summarizes the various features found RhinoCAM-TURN 2019 module.

2 AXIS TURNING

  • Roughing
  • Finishing
  • Groove Roughing
  • Groove Finishing
  • Threading
  • Follow Curve
  • Parting Off
  • Upgraded 3D Model Slicing
  • Global Part Object
  • Materials for Stock Models
  • Knowledge Base Loading and Saving
  • Tool Path Viewer
  • MopSets
  • Machine Control Operations
  • Fixture Offset Operations
  • Drag and drop operations from Knowledge Base
  • Diameter programming

HOLE MAKING

  • Drilling
  • Tapping
  • Boring
  • Reverse Boring

TOOLPATH SIMULATION

  • Toolpath Animation
  • Cut Material Simulation
  • Part to Stock Comparison

POST-PROCESSOR GENERATOR

  • User customizable post-processor generator

 

Más Información
SKU MEC-RC-T21
Código Producto RC-T21
EAN 8435371401637
es_estudiante No
Fabricante MecSoft
Más Información

Art Modeling: 

características RhinoCam

Common to Mill & Turn: 

características RhinoCam

Parts Nesting: 

características RhinoCam

Características

RhinoCAM Features:

RhinoCAM comes in 5 different configurations to suit the various needs of our customers. These are Express (XPR), Standard (STD), Expert (EXP), Professional (PRO) & Premium (PRE). The features found in each of these configurations are tabulated below.

Milling: 

características de Rhinocam 2020

características de Rhinocam 2020

características de Rhinocam 2020

características de Rhinocam 2020

RhinoCAM Features:

RhinoCAM comes in 5 different configurations to suit the various needs of our customers. These are Express (XPR), Standard (STD), Expert (EXP), Professional (PRO) & Premium (PRE). The features found in each of these configurations are tabulated below.

Milling: 

características de Rhinocam 2020

características de Rhinocam 2020

características de Rhinocam 2020

características de Rhinocam 2020

Art Modeling: 

características RhinoCam

Common to Mill & Turn: 

características RhinoCam

Parts Nesting: 

características RhinoCam

What’s New in RhinoCAM 2021:

This document describes the new functionality that is being introduced with the release of the RhinoCAM 2021 product. This document is organized by listing and describing each of the enhancements incorporated into each of the constituent modules of RhinoCAM.

RHINOCAM 2021

RhinoCAM 2021 is a plug-in that runs inside the Rhinoceros 6.0 and 7.0 NURBS modeler from McNeel & Associates and hosts the following modules:

  • 1. MILL
  • 2. TURN
  • 3. NEST
  • 4. ART
  • 5. GCODE EDITOR
  • 6. PROFILE-NEST

Each of these modules can be licensed and invoked separately of the other modules. This section describes the various enhancements and improvement to each of the modules.

COMMON ENHANCEMENTS

This section describes the common enhancements and changes to RhinoCAM 2021.

  1. The new SubD surface type introduced in Rhino 7.0 can now be utilized in RhinoCAM 2021 for Rhino 7.0 product. Rhino SubD objects are high precision spline based surfaces and thus introduce a level of accuracy to the process of creating complex freeform shapes. Whilst traditional SubD ‘push-pull’ editing of edges, faces and vertices is enabled, Rhino’s surface commands such as Loft, Revolve, Sweep 1 & 2 and Extrude all now produce direct SubD output. RhinoCAM can read and use SubD surfaces directly in toolpath creation. A few examples are shown below.
  2. Handling of blocks has been enhanced and made more robust.
  3. A new version of the windowing system for RhinoCAM has been integrated into the 2021 product.
  4. New simulation libraries from Machineworks has been incorporated into all the machining modules. These libraries have improved multi-threaded performance significantly as well as fixed many reported issues.

RhinoCam 2021

 

LICENSING ENHANCEMENTS

The following enhancements have been implemented in the licensing system for RhinoCAM.

  1. Ability to automatically fix node-locked licenses that are locked out due to internet issues has been introduced
  2. Support for Centos 7.0 has been added to the MecSoft license server product

RHINOCAM SOFTWARE DEVELOPMENT KIT (SDK) ENHANCEMENTS

The following enhancements have been added to the RhinoCAM SDK

  1. All Machining Operations that present in the Express configuration can now be created/edited using the API
  2. Ability to create Stock models using the API has been added
  3. The API now allows the ability to modify tooling parameters in existing tools
  4. The API has been enhanced to add and modify additional Machining Parameters
  5. New API example programs have been added to the RhinoCAM SDK

FABRICA lo que tu mente IMAGINA!

Te presentamos nuestro nuevo Webinar Icreatia, en el cual mostraremos el proceso que va desde cómo diseñar los primeros pasos del boceto, hasta cómo llevarlo a la realidad con RhinoCAM.

Escribir Su propia reseña
Para escribir un comentario inicia sesión o crea una cuenta si eres un usuario nuevo.
Quizás te puede interesar