FELIX Wood Filament Dark - 0,5kg
FELIX Wood filament, es el filamento de madera del fabrcante FELIX, que contiene un 30% de fibra de madera real, es un filamento a base de PLA modificado que contiene una mezcla de madera reciclada y polímero aglutinante.
With FELIX Wood Filament Dark you can now print objects that smell and feel like wood. FELIX Wood filament, containing 30% real wood fibre, is a modified PLA based filament that contains a mixture of recycled wood and binding polymer. The printing process with FELIX Wood is very similar to printing with thermoplastic filaments like ABS and PLA.
As this material contains real wood fibre when printing with different temperatures, the prints will have different shades of brown wooden-like surface. Printing at higher temperatures gives your prints darker brown shades. Due to the low shrinkage factor of FELIX Wood it will not deform after cooling. It is a biodegradable plastic made from renewable natural resources.
We recommend to use a 0.5 mm nozzle when working with Wood filament. Printing with special filaments becomes easier and the quality of your prints will increase. Click here to read more about the 0.5 mm nozzle.
|Recommended print settings for 0.35 mm (standard) nozzle||Recommended settings for 0.5 mm nozzle|
|Nozzle diameter: 0.35 mm (standard)||Nozzle diameter: 0.5 mm|
|Temperature hot-end: 185˚C||Temperature hot-end: 190˚C|
|Temperature print bed: 55˚C||Temperature print bed: 55˚C|
|Print speed: 100%||Print speed: 100%|
|Filament flow: -||Filament flow: 120%|
|Retraction distance: -||Retraction distance: 2 mm|
You will get the best results with the following settings:
- Filament diameter: 1,75mm
- Recommended print temp: 185˚C
- Recommended bed temp: 55˚C
- Recommended speed:
- Printing temp. range: 170˚C (for high detailed prints), 200˚C (for higher speeds)
- Bed temp. range: 40 – 60˚C
Storage: Cool and dry (15-25˚C)